-
QLQ-UTMBSM(N) Same size nylon zipper and invisible zipper can be made on the same machine. -
QLQ-BSM This machine can be used to make single side bottom stop, and two sides of bottom stop on the zippers. -
This machine is with extra brightness LCD display screen, fast speed, accurate control, PID auto learning temperature control system with good stablity. -
Most advanced intelligent NC Program is used to provide easy operation and stable production performance. -
This machine is easy to be operated and with good stability. -
QLQ-NDGBM Using the gapping mould of 2 sides, 4 needle hooks, so that there is no need to clean the half teeth on two sides of zippers. -
Summary : This machine can accurately set the zipper length, and specially desinged with PLC gapping (half teeth problem just about 2%). -
Summary : 1) Using the gapping mould of 2 sides, 4 needle hooks, so that there is almost no need to clean the half teeth on two sides of zippers because only 0.2% of zippers will have half teeth. -
Model number : QLQ-NGMC-2(C) Summary : Using the gapping mould of 2 sides, 4 needle hooks, so that there is almost no need to clean the half teeth on two sides of zippers because only 0.2% of zippers will have half teeth. -
Simple machine structure and easy to be operated. -
This machine is easy to be operated , with good stability,and cut open-end zipper. -
It uses ultrasonic cutting to avoid easy loose edge problem of zippers and improve the strength. -
This cutting machine is with touch screen and labour hand which will pull the zipper out for cutting quickly so that big fancy pullers will not get stuck. -
This cutting machine is with touch sreen. It uses ultrasonic cutting to avoid easy loose edge problem of zippers, improve the strength and with low noise. -
This cutting machine is with touch sreen. It uses ultrasonic cutting to avoid easy loose edge problem of zippers, improve the strength and with low noise. -
Different from conventional punch & press in one time, it adopts press first and then punch process. Which can reduce the pin box deform rate, enhance the pulling strength and longer the puncher using life. -
Different from conventional punch-press in one time, it adopts press first and then punch process. Which can reduce the pin box deform rate, enhance the pulling strength and extend the puncher using life. -
Semi automatic Nylon Zipper Box Fixing Machine have back fixing & side fixing choosing -
Summary : This machine has adopted the new way of sending slider, the small steel slice will not get broken easily. -
Automatic Nylon Zipper Side Feeding Slider Mounting Machine,iron frame -
Automatic Plastic Zipper Single Side Slider Mounting Machine -
Simple structure and easy to be operated.Semi-automatic Nylon Zipper Ultrasonic -
This machine is especially suitable for cutting zippers with rack plating sliders, because they will not be scratched easily on this machine. -
This machine is especially suitable for cutting zippers with rack plating sliders, because they will not be scratched easily on this machine. -
Semi automatic Nylon Zipper Pin Fixing Machine have back fixing & side fixing choosing -
Semi automatic Nylon Zipper Pin Pin Fixing Machine Fixing have have Back Side & Fixing Choosing -
This machine is with simple structure and easy to be operated -
Simple machine structure and easy to be operated. -
Summary : This machine is suitable for different size and different material zippers. -
This machine adopts tape pulling and withdrawing by stepping motor and uses hooked needle and zipper teeth to double locate the top stop position, thus can make sure that the top stops are fixed between the first and the second teeth. -
QLQ-UBSM This machine is with high production capacity.The bottom stop made by this machine is with good strength -
This machine is with touch screen. The speed can be adjusted freely and the faults are shown on the screen which helps to guide technicians to solve the fault faster and more efficiently. -
This machine is with high production capacity and easy to be operated. -
QLQ-ZCM-1 This machine uses pneumatic cutting to avoid easy loose edge problem of zippers. -
QLQ-ZCM-2 This machine uses ultrasonic cutting to avoid easy loose edge problem of zippers and improve the strength.
-
QLQ-ZCM-3 This machine is with touch screen. It uses pneumatic cutting to avoid easy loose edge problem of zippers. -
Automatic Nylon Zipper Ultrasonic Closed-end Zigzag Cutting M/C (with labour hand)
QLQ: A Reputable Supplier of Zipper Manufacturing SolutionsGuangzhou QLQ Enterprise Co., Ltd
